FAQ

How do I fix Error 90 on my Wyze camera?

How do I get my Wyze camera back online?

Reboot your Wyze Base Station to reestablish the connection.

  1. Unplug the base station from power, wait 5-10 seconds, then plug it back in.
  2. Once the status light is solid blue, the reboot is complete.

Nov 3, 2021

How do I reset my Wyze camera?

With the Wyze Cam Pan plugged into power, press and hold the setup button on the bottom of the camera for 10 seconds. This will reset the camera. Wait at least 30 seconds for the unit to initiate. This process can take up to 5 minutes.

Why can’t I get my Wyze camera to work?

Unplug the camera’s USB cord, wait 5 seconds, and plug it back in. If you still get the error, you can try to deactivate any firewall settings on your device or network. Slow internet speeds can also cause these errors. Wyze Cam needs a minimum upload speed of 1-2 Mbps for SD and 4-7 Mbps for HD.

How do I fix my Wyze camera?

Basic Troubleshooting

  1. Check that your phone or tablet is on a 2.4 GHz network. On iOS: In the Settings app, tap Wi-Fi to see your network name. …
  2. Forget all WiFi networks, restart your phone/tablet, then reconnect to your 2.4 GHz network. …
  3. Power cycle your Wyze Cam. …
  4. Force close the Wyze app, then open it again.

Nov 3, 2021

Why do my Wyze cameras keep going offline?

Fix Wifi Issues with our Self-Service app Try a factory reset, and attempt set up as a new device: Remove the SD card if there is one inserted. Hold down the setup button until the status light turns solid red. Once the status light begins flashing red, you may attempt to set up again.

How do I fix Wyze offline?

Save your modem or router’s settings and log out. Reboot your modem (unplug it from power, then plug it back in). Wait for it to fully connect and stabilize. In the Wyze app, click the + plus sign > Add Device > Camera and set up each Wyze Cam again.

How do you Unbrick a WYZE camera?

By going into setup mode it steers the camera away from continuing the normal boot up process which causes it to crash. Right after it says ready to connect you can hold down the setup button for 10 to 15 seconds and it will do a factory reset.

Can you use WYZE camera without WiFi?

Wyze 3, along with its various generational cousins, can work without the cloud or Wi-Fi. That’s not to say that it will work seamlessly, as there are conditions. It has to be set up with a Wi-Fi connection before it can be used offline, and cloud storage is avoidable if you have an SD card—sold separately.

How do I format my micro SD card for my Wyze camera?

Format on a Windows computer:

  1. Remove the microSD card from the Wyze Cam.
  2. Insert the card into your computer. …
  3. Open your computer’s file browser.
  4. Right-click on the microSD card in the navigation panel. …
  5. Select “Format…” from the right-click menu.
  6. Ensure that the Format Type is set to FAT32.
  7. Click Start.

Apr 20, 2021

How do I start my Wyze camera?

To set up your Wyze Cam or Wyze Cam Pan:

  1. In the Wyze app, tap Home, then tap + plus sign on the top left.
  2. Tap Add Device.
  3. Tap Cameras > Wyze Cam or Wyze Cam Pan.
  4. With your camera plugged into an outlet, tap Next in the app. …
  5. Pull the base from your camera and single-press SETUP on the bottom of the camera.

How do I fix error code 90?

Wyze error code 90 means your cam is offline. To fix this first try power cycling the camera. Unplug it, wait 15 seconds, then plug the camera back in and allow it reinitialize. If that doesn’t work you’ll probably need to flash new firmware to the cam’s SD card.

How do I start my WYZE camera?

To set up your Wyze Cam or Wyze Cam Pan:

  1. In the Wyze app, tap Home, then tap + plus sign on the top left.
  2. Tap Add Device.
  3. Tap Cameras > Wyze Cam or Wyze Cam Pan.
  4. With your camera plugged into an outlet, tap Next in the app. …
  5. Pull the base from your camera and single-press SETUP on the bottom of the camera.

What do I do when my Wyze camera is offline?

Fix Wifi Issues with our Self-Service app

  1. Try powercycing your camera by unplugging for about 30 seconds and plugging it back in.
  2. Reboot your router.
  3. Try a factory reset, and attempt setup as a new device:

Nov 3, 2021

How do I reset my outdoor Wyze camera?

Unlike other Wyze Cam devices, Wyze Cam Outdoor cannot be hard reset. In the event that the camera is stolen, it cannot be reset and disconnected from your Wyze Base Station or your account. Instead, it can be power-cycled by flipping the switch on the back of the device.

Why are all of my WYZE devices offline?

First, ensure that the outlet or fixture that the Wyze Plug is plugged into isn’t controlled by a switch (such as a light switch or power strip.) If so, make sure it is turned on. Next, try and power-cycle the Plug by removing it from the outlet, waiting at least 5 seconds, and then plugging it back in.

How do I format my micro SD card for WYZE camera?

Format on a Windows computer:

  1. Remove the microSD card from the Wyze Cam.
  2. Insert the card into your computer. …
  3. Open your computer’s file browser.
  4. Right-click on the microSD card in the navigation panel. …
  5. Select “Format…” from the right-click menu.
  6. Ensure that the Format Type is set to FAT32.
  7. Click Start.

Apr 20, 2021

Is Wyze a Chinese company?

Though the company is based in Santa Monica, California, their cameras and products are assembled in China – it says so right on the box! It isn’t so much the fact that a product is made in China that can be of concern – it’s the quality control and monitoring of said assembly.

Can you hack a WYZE camera?

Yes, the Wyze Camera can be hacked and somebody can have access to the live video of your home or office. Keep in mind that the camera is not “unckeable” but there are ways to reduce the problem and increase the camera security.

You may also like...